chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Clockspring Assembly / Spiral Cable, Air Bag > < Diagram Information and Instructions|Page 15026
Page 1
background image

Air Bag Deactivation Indicator: Description and Operation

INFLATABLE RESTRAINT PASSENGER AIR BAG ON/OFF INDICATORS

The PASSENGER AIR BAG ON/OFF indicators located on the rear view mirror are used to notify the driver when the Passenger Presence System
(PPS) has enabled or disabled the instrument panel (I/P) inflator module. The PPS air bag indicators will also inform the driver of any PPS malfunctions.
When the ignition is turned on, the PPS module is supplied with ignition 1 voltage and commands both PASSENGER AIR BAG ON/OFF indicators ON
for 5 seconds. The PPS module conducts tests on the PPS components and circuits while both ON/OFF indicators are ON. If no malfunctions are
detected the PPS module will turn the PASSENGER AIR BAG indicator ON or OFF depending on the status of the PPS. If a malfunction is detected, the
PPS module will store a diagnostic trouble code (DTC), default the PPS to the OFF state and communicate with the sensing and diagnostic module
(SDM) that a DTC has been set. When the SDM detects that the PPS has set a DTC, the SDM will set either DTC B0092 or B0098 and request the
instrument panel cluster (IPC) to turn the AIR BAG indicator located on the IPC ON. This is done to notify the driver of any PPS malfunctions. The
presence of a Supplemental Inflatable Restraint (SIR) System malfunction could result in non-deployment of the air bags. The AIR BAG indicator will
remain ON until the malfunction has been repaired.

Clockspring Assembly / Spiral Cable, Air Bag > < Diagram Information and Instructions|Page 15026