TrailBlazer 2WD V8-6.0L VIN H (2006)
9. Remove the lower ball joint retaining nut.
10. Disconnect the lower ball joint from steering knuckle using the J43631.
11. Remove the lower control arm to lower control arm bracket mounting nuts.
12. Remove the lower control arm to lower control arm bracket mounting bolts.
Important: Note the direction the bolts are removed for installation.
13. Pivot the lower control arm outward and downward in order to disconnect the lower control arm from the lower control arm bracket.
Important: Take care not to disengage the axle shaft from the transmission (4WD only).
14. Remove the lower control arm from the vehicle.
Important: Ensure that the spacer stays in position on the front control arm bracket front bushing.
