TrailBlazer 2WD V8-6.0L VIN H (2006)
Suspension Mode Switch: Service and Repair
Inflator Air Switch Replacement
Removal Procedure
1. Raise and support the vehicle.
2. Disconnect the inflator air switch harness from the air compressor.
3. Lower the vehicle.
4. Remove the rear quarter lower trim panel.
5. Remove the inflator air switch from the vehicle.
Installation Procedure
1. Install the inflator air switch to the vehicle.
2. Install the rear quarter lower trim panel.
3. Raise the vehicle.
4. Connect the inflator air switch harness to the air compressor.
5. Lower the vehicle.
