chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Sensors and Switches - Transmission and Drivetrain > < Engine, A/T Controls - Shared Diagnostic Trouble Codes|Page 11261

TrailBlazer 2WD V8-6.0L VIN H (2006)

Page 5
background image

7. Connect the ECM electrical connector (1) to the TCM (2) if previously removed.

8. Install the ECM/TCM cover (2) to the ECM/TCM bracket (1).
9. Ensure the ECM/TCM cover retainers (2) are fully engaged with the ECM/TCM bracket (1).

10. Connect the cooling fan electrical connector.
11. Connect the negative battery cable. 
12. If the TCM was replaced the replacement TCM must be programmed. 

Sensors and Switches - Transmission and Drivetrain > < Engine, A/T Controls - Shared Diagnostic Trouble Codes|Page 11261