TrailBlazer 4WD L6-4.2L (2007)
3. Install the shock module yoke to lower control arm mounting nut.
Tighten the shock module yoke to lower control arm mounting nut to 110 N.m (81 lb ft).
4. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation.
5. Lower the vehicle.
Rear Suspension Shock Absorber
Shock Absorber Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
Notice: The rear axle must not be allowed to hang freely while servicing rear suspension components. Not supporting the rear axle will result in
damage to the upper control arm and/or to the air suspension components.
2. Support the rear axle.
3. Remove the shock absorber upper mounting bolt.
4. Remove the shock absorber lower mounting bolt.
5. Remove the shock absorber from the vehicle.
Installation Procedure
