TrailBlazer 4WD L6-4.2L (2007)
Notice: Refer to Fastener Notice.
3. Install the transfer case adapter mounting bolts to the transmission.
Tighten the bolts to 47 N.m (35 lb ft).
4. Lower the transmission to install the transmission mount bolts.
5. Install the transmission mount bolts.
Tighten the bolts to 25 N.m (18 lb ft).
6. Remove the transmission jack.
7. Install the transfer case assembly to the vehicle. Refer to Transfer Case Assembly Replacement.
8. Lower the vehicle. Refer to Lifting and Jacking the Vehicle.