chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Driver Information Center - Setting Language Options|Page 11657 > < Electrical - No Start/Multiple Systems Inoperative|Page 11652
Page 1
background image

Driver/Vehicle Information Display: All Technical Service Bulletins
Driver Information Center - Setting Language Options

File In Section: 08 - Body and Accessories 

Bulletin No.: 01-08-49-015

Date: October, 2001

INFORMATION

Subject:
Understanding Driver Information Center Personalization/Language Options

Models:
2002 Chevrolet and GMC SIT Utility Models (TrailBlazer, Envoy) 
2002 Oldsmobile Bravada
with Driver Information Center Display (RPO U68)

The Driver Information Center (DIC) display on the instrument cluster has a multi-lingual capability. A vehicle owner may accidentally put the DIC into
a language he or she does not understand. This may make it difficult or impossible for the owner to figure out how to get the display back to the
preferred language. This difficulty is resulting in clusters being replaced at the dealer as a warranty return.

Dealers should reset the DIC back to the language that the owner understands by following these steps:

1.

Press and hold the personalization button (2) and the trip information button (1) at the same time. The DIC will begin scrolling through the
languages. Each language will be shown in that particular language (English will be in English, French will be in French, etc.).

2.

When the preferred language appears, release both buttons. The DIC will then display the information in the language that was selected.

Driver Information Center - Setting Language Options|Page 11657 > < Electrical - No Start/Multiple Systems Inoperative|Page 11652