TrailBlazer 4WD L6-4.2L VIN S (2002)
2. Partially install the front bracket retaining bolts.
3. Carefully pull down on the rearward edge of the headliner in order to expose the rear bolt installation area.
4. Partially install the rear bracket retaining bolt.
NOTE: Refer to Fastener Notice in ice Precautions.
5. Fully seat the retaining bolts.
Tighten
Tighten the bolts to 10 N.m (88 lb in).
6. Install the two rear overhead console carrier screws (1).
Tighten
Tighten the screws to 1.2 N.m (10 lb in).
7. Install the video display assembly.
9. Close the video display screen.
10. Install the bolt cover bezel.