chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Interior - Cargo Cover Handle is Broken|Page 12818 > < Interior - Cargo Cover Handle is Broken|Page 12816
Page 5
background image

1.

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in the General Information sub-section of the Service Information (SI
Document ID # 744862).

2.

Remove the lower push-in retainer and the upper bolt from both the right and left front fascia pencil braces.

3.

Remove the right and left front fascia pencil braces.

4.

Replace the front fascia pencil braces with new pencil braces. Refer to the applicable part numbers listed below.

5.

Install and "finger tighten" the upper brace bolts on both sides.

6.

Install the lower brace push in retainers on both sides.

Tighten

Tighten the upper brace bolts to 10 N.m (89 lb in).

7.

Lower the vehicle.

Parts Information

Parts are expected to be available 8-8-2002 from GMSPO.

Warranty Information

For vehicles repaired under warranty, use the table.

Interior - Cargo Cover Handle is Broken|Page 12818 > < Interior - Cargo Cover Handle is Broken|Page 12816