TrailBlazer 4WD L6-4.2L VIN S (2002)
Hood Latch: Service and Repair
Hood Latch Support Replacement
Hood Latch Support Replacement
Removal Procedure
1. Remove the radiator air intake baffle.
2. Remove the headlamp housing panel.
3. Remove the hood latch.
4. Remove the bolts that retain the hood latch support to the radiator support.
5. Remove the hood latch support from the vehicle.
Installation Procedure
1. Install the hood latch support to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the bolts that retain the hood latch support to the radiator support.
Tighten the bolts to 20 N.m (15 lb ft).
3. Install the hood latch.
4. Install the headlamp housing panel.
5. Install the radiator air intake baffle.