TrailBlazer 4WD L6-4.2L VIN S (2002)
Cross-Member: Service and Repair
Steering Gear Crossmember Replacement - Front
Steering Gear Crossmember Replacement - Front
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the engine shield mounting bolts.
3. Remove the engine shield.
4. Remove the lower control arm to frame mounting bolts.
5. Remove the steering gear crossmember mounting bolts.
6. Remove the steering gear crossmember.
Installation Procedure
1. Install the steering gear crossmember.