chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Bracket Replacement - Console Floor|Page 13532 > < Bracket Replacement - Console Floor|Page 13530
Page 4
background image

Interior in Roof.

Installation Procedure

1. If replacing the console, install the noise cancellation microphone if equipped. Refer to Microphone Replacement - Radio Volume Compensator

Interior in Roof.

2. If replacing the console, install the power sunroof switch if equipped. Refer to Sunroof Switch Replacement in Roof.
3. If replacing the console, install the personal message player/recorder if equipped. Refer to Personal Message Player/Recorder Replacement in

Entertainment.

4. If replacing the console, install the OnStar (R) microphone if equipped. Refer to OnStar Microphone Replacement in Cellular Communication.
5. If replacing the console, install the garage door opener if equipped. Refer to Garage Door Opener Replacement in Garage Door Opener.

6. Position the console to the roof panel. 
7. Connect the electrical connectors as needed. 
8. Seat the front retaining tabs. 

Notice:  Refer to Fastener Notice in Service Precautions.

9. Install the 2 screws retaining the console to the roof panel. 

Tighten the screws to 1.2 N.m (10 lb in).

Overhead Console Replacement - Rear

Overhead Console Replacement - Rear

Removal Procedure

1. Remove the 4 screws that retain the rear console to the roof panel.
2. Lower the rear console from the headliner.
3. Remove the rear console from the vehicle.

Installation Procedure

Bracket Replacement - Console Floor|Page 13532 > < Bracket Replacement - Console Floor|Page 13530