chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Dashboard / Instrument Panel > < Bracket Replacement - Console Floor|Page 13531
Page 5
background image

1. Position the rear console to the roof panel ensuring the screw holes are indexed properly.
2. Partially install the 4 screws that retain the rear console to the roof panel.

Notice:  Refer to Fastener Notice in Service Precautions.

3. Install the 4 screws retaining the rear console to the roof panel.

Tighten the screws to 1.2 N.m (10 lb in).

Roof Console Retainer Replacement

Roof Console Retainer Replacement

Removal Procedure

1. Lower the headliner. Refer to Headliner Replacement (Trailblazer EXT, Envoy XL) Headliner Replacement (Trailblazer, Envoy, Bravada).

2. Remove the 4 screws securing the console retainer to the Z clips.
3. Remove the roof retainer from the vehicle.
4. If replacing the roof retainer, remove the Z clips from the roof panel.

Installation Procedure

1. If replacing the roof retainer, install the roof retainer the roof panel ensuring the Z clips are fully seated.
2. If installing the existing roof retainer, position the roof retainer to the roof panel.

Notice:  Refer to Fastener Notice in Service Precautions.

3. Partially install the 4 screws retaining the roof retainer to the Z clips.

Tighten the roof retainer attachment screws to 1.2 N.m (10 lb in).

4. Install the headliner.

Dashboard / Instrument Panel > < Bracket Replacement - Console Floor|Page 13531