TrailBlazer 4WD L6-4.2L VIN S (2002)
16. Attach the mechanic's wire to the end of the headliner harness.
17. Pull the bottom of the mechanic's wire away from the cowl insulation access hole in order to position the headliner harness behind the IP.
18. Attach the 3 clips (1) securing the wire harness to the windshield pillar.
19. Attach the lower rosebud (2) retaining the headliner harness to the cowl.
20. Connect the coax cable (2) and headliner harness connector (1).
21. Close the IP compartment door.
22. Install the IP trim pad.
23. Install the windshield garnish moldings.
24. Install the center pillar trim panels.
25. Install the front side door sill plates.
26. Install the right sound insulator.
