TrailBlazer 4WD L6-4.2L VIN S (2002)
10. Reach above the headliner to access the electrical connector (1).
11. Remove the electrical connectors from the headliner substrate.
12. Disconnect the sunshade electrical connector from the headliner harness.
13. Remove the sunshade from the vehicle.
INSTALLATION PROCEDURE
1. Lower the headliner in order to gain access to the wire harness.
2. Position the sunshade to the headliner.
3. Connect the sunshade electrical connector to the headliner harness.
4. Using a glue gun, hot melt the electrical connectors (1) to the headliner substrate, ensuring the connectors are securely attached to the substrate.
