TrailBlazer 4WD L6-4.2L VIN S (2002)
Power Door Lock Actuator: Procedures
Lock Actuator Replacement - Front Door
REMOVAL PROCEDURE
1. Remove the door trim panel.
2. Remove the water deflector.
3. Remove the door latch assembly.
4. Remove the 2 screws that retain the actuator (1) to the lock.
5. Simultaneously lift up on and rotate the actuator away from the latch in order to disengage the rubber bumper (1) from the latch.
6. Remove the actuator from the latch.
INSTALLATION PROCEDURE