TrailBlazer 4WD L6-4.2L VIN S (2002)
Luggage Rack: Removal and Replacement
Luggage Carrier Replacement
Luggage Carrier Replacement
Removal Procedure
1. Using a flat bladed tool, carefully remove the finish covers (3) from the luggage carrier side rails (2).
2. Unlock the cross rails (4) by releasing the locking tab (1) on the end of each cross rail.
3. Slide the cross rails forward and remove from the side rails.
4. Remove the bolts that retain the side rails to the roof panel.
5. Remove the side rails from the roof panel.
Installation Procedure
1. Position the side rails (2) to the roof panel.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the bolts which retain the side rails to the roof panel, starting with the rearmost bolt first on each side.
Tighten the luggage carrier side rail bolts to 5 N.m (44 lb in).
Important: Ensure that the loops on the cross rails are indexed toward the front of the vehicle.
3. Install the cross rails (4) to the side rails.
4. Lock the cross rails to the slide rails.
5. Install and secure the finish covers (3) to the side rails.
Luggage Carrier Slats Replacement
Luggage Carrier Slats Replacement
Tools Required
J 25070 Heat Gun
Removal Procedure
1. Mark the location of the luggage carrier slats on the roof with masking tape.
