TrailBlazer 4WD L6-4.2L VIN S (2002)
Important:
Midway through the rotation cycle, the tool will move further into the access hole.
6.
Push upward on the tool while rotating the sunshade parallel to the windshield. The sunshade pivot arm bezel should appear to be recessed into the
bezel.
Important:
Ensure the pivot arm is recessed into the bezel before removing the sunshade from the headliner.
7.
Apply outboard pressure to the sunshade while the sunshade is parallel to the windshield.
8.
Pull the sunshade downward while maintaining outboard pressure to the sunshade. You will notice a separation between the headliner and the
sunshade bezel.
9.
In order to remove the sunshade from the headliner, carefully grab the headliner at the windshield pillar area and apply downward pressure while
gently rocking the sunshade up and down.
