TrailBlazer 4WD L6-4.2L VIN S (2002)
1. Position the seat back cover and pad on the seat back frame.
2. Install the head restraint guides by pushing them through the cover into the frame until the locking tabs snap into place. The guide with the locking
tab (1) installs on the right hand side of the seat.
3. Install the three hog rings (1) securing the cover to the pad.
4. Pull the cover down over the pad ensuring that the hook and loop fasteners (2, 3) are pressed together.
5. Pull the seat cover back through the opening between the seat cushion and the seat back.