TrailBlazer 4WD L6-4.2L VIN S (2002)
1. Install the seat cushion panel on the pad and cover.
2. Install the J-strips (2) securing the seat cushion cover to the seat cushion panel.
3. Install the pull handle (1).
NOTE: Refer to Fastener Notice in Service Precautions.
4. Install the rear seat cushion assembly (1) to the seat latch rod (3) with two rear seat cushion bolts (2).
Tighten
Tighten the rear seat cushion bolts to 11 N.m (97 lb in).