TrailBlazer 4WD L6-4.2L VIN S (2002)
2. Remove the 2 bolts securing the bracket assembly to the seat cushion.
3. Remove the bracket assembly from the seat cushion.
Installation Procedure
1. Position the bracket assembly on the seat cushion.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the 2 bolts securing the bracket assembly to the seat cushion.
Tighten the rear seat cushion bracket bolts to 25 N.m (18 lb ft).
3. Install the rear seat cushion assembly in the vehicle.
Seat Cushion Bracket Replacement - Rear No. 1 (TrailBlazer EXT, Envoy XL)
Seat Cushion Bracket Replacement - Rear No. 1 (Trailblazer EXT, Envoy XL)
Removal Procedure
1. Remove the seat from the vehicle.