TrailBlazer 4WD L6-4.2L VIN S (2002)
2. Remove the rear seat bracket trim covers (1).
3. Remove the rear seat cushion bracket mounting nuts (2).
4. Remove the rear seat cushion bracket.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the rear seat cushion bracket to the seat cushion bottom with the four mounting nuts (2).
Tighten the rear seat cushion bracket mounting nuts to 25 N.m (18 lb ft).
2. Install the rear seat bracket trim covers (1).
3. Install the seat in the vehicle.
Seat Cushion Latch Release Assembly Replacement - Rear No. 1 (TrailBlazer, Envoy, Bravada)
Seat Cushion Latch Release Assembly Replacement - Rear No. 1 (Trailblazer, Envoy, Bravada)
Removal Procedure
1. Remove the rear seat cushion assembly from the vehicle.
2. Remove the rear-seat cushion cover and the pad.
3. Remove the strap (1) from the rear seat cushion latch (2).
4. Remove the 3 bolts securing the rear seat cushion latch to the seat pan.