TrailBlazer 4WD L6-4.2L VIN S (2002)
1. Install the mid-position floor latch assembly to the seat cushion frame with the bolts (1).
Tighten
Tighten the rear seat mid-position floor latch assembly bolts to 35 N.m (26 lb ft).
2. Install the cable (3) to the mid-position floor latch assembly (2).
3. Install the rear center seat belt buckle assembly to the floor latch assembly.
4. Install the trim panel to the seat cushion.
5. Install the seat in the vehicle.
Seat Latch Rod Replacement - Rear No. 2
REMOVAL PROCEDURE
1. Remove the seat from the vehicle.
2. Remove the two bolts (2) securing the rear seat cushion assembly (1) to the seat latch rod (3).