chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Seat Track|Power|Page 14474 > < Seat Cushion Latch Release Assembly Replacement - Rear No. 1|Page 14469

TrailBlazer 4WD L6-4.2L VIN S (2002)

Page 1
background image

Seat Track: Service and Repair
Power

REMOVAL PROCEDURE

1. Remove the front bucket seat assembly from the vehicle.
2. Remove the seat cushion trim panel.
3. Remove the seat belt buckle nut.

4. Disconnect the black electrical connector (6) from the seat back harness.
5. Disconnect the black electrical connector (3) from the seat belt buckle.
6. Disconnect the gray lumbar electrical connector (5), if equipped.
7. Remove the SIR harness (2) from the harness clips (1, 4), and remove the SIR harness from the seat.

Seat Track|Power|Page 14474 > < Seat Cushion Latch Release Assembly Replacement - Rear No. 1|Page 14469