TrailBlazer 4WD L6-4.2L VIN S (2002)
Notice: Refer to Fastener Notice in Cautions and Notices.
5. Install the master cylinder bolts and nuts
Tighten
Tighten the nuts to 36 N.m (27 lb ft).
6. Remove the rubber plugs from the brake lines
7. Connect the brake pipes to the master cylinder.
Tighten
Tighten the pipe nuts to 30 N.m (22 lb ft).
8. Bleed the hydraulic brake system. Refer to Hydraulic Brake System Bleeding.
