chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Park Brake Cable Replacement|Page 9038 > < Park Brake Cable Replacement
Page 2
background image

6. Install a pole jack with a block of wood under the fuel tank.

7. Remove the shield for the fuel tank. 
8. Remove the rear support bracket from the fuel tank.

Important:  When performing this service procedure, the fuel tank will only drop about four inches when supported by the pole jack. It is not
necessary to lower the fuel tank any further than that.

9. Lower the fuel tank to allow access to the rear park brake cable retainer above the fuel tank.

10. Remove the park brake cable retaining nuts from the underbody mounting studs.

11. Remove the park brake cable from the park brake cable retainers, left rear shown.

Park Brake Cable Replacement|Page 9038 > < Park Brake Cable Replacement