TrailBlazer 4WD L6-4.2L VIN S (2002)
Parking Brake Warning Switch: Service and Repair
Park Brake Warning Lamp Switch Replacement
Removal Procedure
1. Remove the front passenger side seat.
2. Remove the park brake warning lamp switch electrical connector.
3. Remove the park brake warning lamp switch retaining screw.
4. Remove the park brake warning lamp switch from the vehicle.
Installation Procedure
1. Install the park brake warning lamp switch.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the park brake warning lamp switch retaining screw.
^
Tighten the park brake warning lamp switch mounting bolt to 4 Nm (35 inch lbs.).
3. Connect the electrical connector.
4. Install the front passenger side seat.