TrailBlazer 4WD L6-4.2L VIN S (2002)
10. Unclip the fan shroud from the radiator at the side panels (1).
11. Tilt the radiator and the condenser forward.
12. Lift the fan and the shroud up and out towards the engine to release the fan from the radiator to clear the radiator inlet.
Installation Procedure
1. Install the fan and the shroud onto the lip of the radiator bottom.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the 2 bolts into the upper fan shroud and tighten.
^
Tighten the bolts to 28 Nm (21 ft. lbs.).
3. Connect the electrical connector.
4. Clip the fan shroud to the radiator at the side panels (1).
