TrailBlazer 4WD L6-4.2L VIN S (2002)
1. Install the coolant heater to the engine block.
^
Tighten the coolant heater to 50 Nm (37 ft. lbs.).
2. Install the coolant heater cord to the heater (2).
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the engine harness bracket and secure the bracket with the bolt.
^
Tighten the engine harness bracket bolt to 45 Nm (33 ft. lbs.).
4. Secure the harnesses to the bracket.
5. Install the PCM.
6. Fill the cooling system.