TrailBlazer 4WD L6-4.2L VIN S (2002)
Engine Mount: Service and Repair
Engine Mount and Bracket Replacement- Left
Engine Mount and Bracket Replacement- Left
^
Tools Required
-
J 41240 Fan Clutch Remover and Installer
Removal Procedure
1. Disconnect the negative battery cable.
2. Using the J 41240 to secure the water pump pulley, loosen the cooling fan hub nut from the water pump shaft.
3. Remove the MAP sensor electrical connector and the retainer (1).
4. Remove the MAP sensor (2).
5. Remove the left shock module (if frame mount is being removed).
