TrailBlazer 4WD L6-4.2L VIN S (2002)
8. Install the engine protection shield and secure the shield with the bolts.
^
Tighten the engine protection shield bolts to 25 Nm (18 ft. lbs.).
9. Install the right and the left lower engine mount nuts.
^
Torque the lower engine mount nuts to 70 Nm (52 ft. lbs.).
10. Lower the vehicle.
11. Install the left shock module.
12. Install the MAP sensor (2).
13. Install the MAP sensor retainer (1) and the electrical connector.
