TrailBlazer 4WD L6-4.2L VIN S (2002)
Air Door Actuator / Motor: All Technical Service Bulletins
A/C - Mode Door Actuator Tool
Subject:
Info - Essential Tool for HVAC Mode Door Actuator Replacement
# 05-01-38-001A - (04/08/2005)
Models:
2002 Chevrolet TrailBlazer Models
2002 GMC Envoy Models
2002 Oldsmobile Bravada
This bulletin is being revised to update the references to the service procedures in SI and add warranty and parts information. Please discard Corporate
Bulletin Number 05-01-38-001 (Section 01 - HVAC).
The purpose of this service bulletin is to announce the release of a new essential tool to service the Heating, Ventilation and Air Conditioning (HVAC)
Mode Door Actuator. The new tool is an HVAC Puller, special tool number GE-47676, which was shipped in the Fall of 2004 to all Chevrolet and GMC
dealers. It will no longer be necessary to replace the entire Mode Door Cam Assembly when only the Mode Door Actuator requires replacement.
Previous to the release of this tool, it was necessary to remove the entire Instrument Panel Carrier to replace the Mode Door Cam Assembly. Now the
Mode Door Actuator can be serviced from underneath the left side of the Instrument Panel Carrier using this new special tool.
The service procedures in SI have been updated to include the use of this new special tool. To replace the entire Mode Door Cam Assembly refer to the
Mode Cam Replacement procedure in SI for more information (Document ID # 1618104). To replace just the Mode Door Actuator, refer to the Mode
Actuator Replacement procedure in SI for more information (Document ID # 1609154). The labor time associated with labor operation D1808 has been
changed to reflect the time savings when this new special tool is used. Labor operation D1829 has been added to the labor time guide to be used if the
entire Mode Door Cam Assembly is replaced.
Parts Information
Warranty Information
For vehicles repaired under warranty, use the table.
Disclaimer