TrailBlazer 4WD L6-4.2L VIN S (2002)
Air Bag(s) Arming and Disarming: Service and Repair
Enabling
1. Remove the key from the ignition.
2. Connect the RF side impact module yellow 2-way connector (1) located under the passenger seat.
3. Install the connector position assurance (CPA) to the RF side impact module yellow 2-way connector (2) located under the passenger seat.
4. Connect the LF side impact module yellow 2-way connector (1) located under the driver seat.
5. Install the CPA to the LF side impact module yellow 2-way connector (2) located under the driver seat.
6. Connect the IP module yellow 2-way connector (1) located behind the main IP support.
7. Install the CPA to the IP module yellow 2-way connector (1) located behind the main IP support.