TrailBlazer 4WD L6-4.2L VIN S (2002)
High Beam Relay: Service and Repair
TOOLS REQUIRED
J 43244 Relay Puller Pliers
REMOVAL PROCEDURE
1. Open and support the hood.
2. Remove the protective covers from the underhood fuse block.
3. Use the J 43244 in order to remove the high beam relay (1) from the underhood fuse block.
INSTALLATION PROCEDURE
1. Use the J 43244 in order to install the high beam relay (1) to the underhood fuse block.
2. Install the protective covers to the underhood fuse block.
3. Close the hood.