chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Recall - Fuel Filter Fitting Retainer Replacement|Page 5533 > < Recall - Fuel Filter Fitting Retainer Replacement
Page 2
background image

2.

Remove the fuel pump relay from Junction Block # 2.

3.

Start the engine and let it run until it stalls.

4.

Turn the ignition key and crank the engine an additional 3 seconds to ensure that the fuel pressure has been relieved.

5.

Turn the ignition to the OFF position.

6.

Disconnect the negative battery cable.

7.

Raise the vehicle on a suitable hoist.

8.

Clean all of the fuel filter connections and the surrounding areas before disconnecting the fuel pipes in order to avoid possible contamination of
the fuel system.

Important:

The quick connect retainers will remain on the fuel filter when the fuel pipes are disconnected in the next step.

9.

Squeeze the tabs on the retainers inward and disconnect both fuel pipes from the fuel filter.

10.

Remove the white retainers from the fuel filter and discard.

11.

Install the new blue retainers on the fuel filter.

12.

Connect both fuel pipes to the fuel filter and tug firmly on the pipes to ensure that they are fully engaged.

13.

Lower the vehicle.

14.

Connect the negative battery cable.

15.

Install the fuel pump relay in the junction block.

16.

Turn the ignition to the ON position and check for leaks.

17.

Install the GM Recall Identification Label.

RECALL IDENTIFICATION LABEL - For US and IPC

Place a Recall Identification Label on each vehicle corrected in accordance with the instructions outlined in this Product Recall Bulletin. Each label
provides a space to include the recall number and the five (5) digit dealer code of the dealer performing the recall service. This information may be
inserted with a typewriter or a ball point pen.

Put the Recall Identification Label on a clean and dry surface of the radiator core support in an area that will be visible to people servicing the vehicle.
When installing the Recall Identification Label, be sure to pull the tab to allow adhesion of the clear protective covering. Additional Recall Identification
Labels for US dealers can be obtained from Dealer Support Materials by either ordering on the web from DWD Store, gm-dealerworld.com, or calling
1-866-700-0001 (Monday-Friday, 8:00 a.m. to 5:00 p.m. EST). Request Item Number 5-1015 when ordering.

Additional Recall Identification Labels for IPC dealers can be obtained from your Regional Marketing Office.

RECALL IDENTIFICATION LABEL - For CANADA

Recall - Fuel Filter Fitting Retainer Replacement|Page 5533 > < Recall - Fuel Filter Fitting Retainer Replacement