TrailBlazer 4WD L6-4.2L VIN S (2002)
Camshaft Position Sensor: Service and Repair
Camshaft Position (CMP) Actuator Solenoid Valve Replacement
Camshaft Position Actuator Solenoid Valve Replacement
Removal Procedure
^
Remove the drive belt. Refer to Drive Belt Replacement.
^
Remove the 3 power steering pump bolts and move the pump out of the way.
^
Disconnect the camshaft position actuator solenoid electrical connector.
^
Remove the camshaft position actuator solenoid retaining bolt (3).
^
Remove the camshaft position actuator solenoid (2) from the engine block.
^
Clean debris from the hole (1).
Installation Procedure
^
Lubricate the hole (1) with engine oil.
Notice: Refer to Fastener Notice in the Preface section.