TrailBlazer 4WD L6-4.2L VIN S (2002)
Clockspring Assembly / Spiral Cable: Service and Repair
INFLATABLE RESTRAINT STEERING WHEEL MODULE COIL REPLACEMENT
REMOVAL PROCEDURE
CAUTION: Refer to SIR Caution in Service Precautions.
1. Disable the inflatable restraint steering wheel module. Refer to Air Bag(s) Arming and Disarming.
2. Tilt the steering column to the CENTER position.
3. Remove the steering wheel from the column.
4. Remove the upper and lower trim covers.
5. If necessary, check the steering column for accident damage. Refer to Steering Column Accident Damage Inspection.
IMPORTANT: If the steering wheel has PAD control, the inflatable restraint steering wheel module coil and wire harness assembly must come off as
one piece.
If the steering wheel does not have PAD control, the inflatable restraint steering wheel module coil will come off by itself.
6. Remove the wire harness strap.
7. If the steering wheel has PAD control remove the wire harness assembly. Refer to Steering Column Wire Harness Assembly Replacement.
8. Remove the retaining ring (1) using snap ring pliers.
9. Remove the inflatable restraint steering wheel module coil (2).
10. If necessary, remove the wave washer (3).
INSTALLATION PROCEDURE