TrailBlazer 4WD L6-4.2L VIN S (2002)
Tighten the screws to 3 Nm (26 lb in).
44.
Reposition the seat switch bezel to the side of the seat cushion and install the screws.
Tighten
Tighten the screws to 3 Nm (26 lb in).
45.
If equipped, install the lumbar support knob.
46.
If equipped, install the recliner handle and screw.
Tighten
Tighten the screw to 3 Nm (26 lb in).
47.
Connect the side impact air bag electrical connector under the seat.
48.
Install the SIR fuse.
49.
Turn the ignition switch to the ON position and verify that the SIR light flashes seven times and goes out.
50.
For U.S. and Canada: All replaced seat belt retractors are to be held until a return request is received from the GM Warranty Parts Center (WPC).