TrailBlazer 4WD L6-4.2L VIN S (2002)
1. Install the new positive cable to the generator and secure the positive cable with the nut (1).
Tighten
Tighten the positive cable bolt to 9 N.m (80 lb in).
2. Connect the positive cable to the junction block and secure the positive cable with the bolt.
Tighten
Tighten the positive cable nut to 10 N.m (89 lb in).
3. Connect the positive cable to the starter and secure the positive cable with the nut.
Tighten
Tighten the nut 9 N.m (80 lb in).
4. Connect the harness to the engine harness bracket.
5. Connect the cable to the positive battery post.
Tighten
Tighten the battery positive bolt to 15 N.m (11 lb ft).
6. Connect the battery negative cable.