TrailBlazer 4WD L6-4.2L VIN S (2002)
13.
Position the outlet in the retainer ring and partially push the outlet in.
14.
Through the controller unit opening, connect the electrical connector to the back of the outlet.
15.
Press in the rest of the outlet until fully seated.
16.
Install the auxiliary audio/heater controller unit back into place.
17.
Install the AUX PWR 1 Fuse 46 (20 amp) into the rear fuse block.
Parts Information
Parts are currently available from GMSPO.
Warranty Information
For vehicles repaired under warranty, use the table shown.
DISCLAIMER