TrailBlazer 4WD L6-4.2L VIN S (2002)
Band Apply Servo: Service and Repair
2-4 Servo
Removal Procedure
^
Tools Required
-
J 29714-A Servo Cover Depressor
1. Raise the vehicle. Refer to Vehicle Lifting
2. Support the transmission with a suitable jack.
3. Remove the transmission support. Refer to Transmission Support Replacement on page 8-1405 in Frame and Underbody.
4. Remove the front exhaust pipe assembly.
5. Remove the heat shield.
6. Carefully lower the transmission to gain access to the 2-4 Servo.
7. Install the J29714-A.
8. Tighten the bolt in order to compress the servo cover.
