TrailBlazer 4WD L6-4.2L VIN S (2002)
8. Place the cylinder line retaining plate (2) over the cylinder line beads at the valve end.
Notice: Refer to Fastener Notice in Service Precautions.
9. Install the TORX screw (1) into the cylinder line retaining plate (2) and tighten using an E 8 socket.
Tighten the screw to 15 Nm (12 ft. lbs.).
10. Tighten both cylinder line nuts (3) at the cylinder end.
Tighten the nuts to 31 Nm (23 ft. lbs.).
