TrailBlazer 4WD L6-4.2L VIN S (2002)
5. Loosen the jam nut (1) and remove the outer tie rod (2) from the inner tie rod (3). Do not reuse the jam nut.
6. Inspect the shaft for bent or damaged threads.
7. Clean the tapered surface of the steering knuckle.
Installation Procedure
1. Lubricate the inner tie rod (3) threads with a suitable chassis lubricant before installing the outer tie rod (2).
2. Install the new jam nut (1) to the outer tie rod (2).
3. Install the outer tie rod (2) to the inner tie rod (3)
4. Install the outer tie rod to the steering knuckle.
Notice: Refer to Fastener Notice in Service Precautions.
5. Install the outer tie rod retaining nut.