chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Case, A/T > < A/T - 4T65-E Fluid Leaks From Reverse Servo Cover|Page 6813
Page 4
background image

9. Install the two bolts securing the transmission heat shield to the transmission.

^

Tighten the bolts to 17 Nm (13 ft. lbs.).

10. Install the exhaust pipe assembly. 
11. Install the transmission support. 
12. Remove the transmission jack.
13. Lower the vehicle.
14. Fill the transmission to the proper level with DEXRON-III transmission fluid.

Case, A/T > < A/T - 4T65-E Fluid Leaks From Reverse Servo Cover|Page 6813