TrailBlazer 4WD L6-4.2L VIN S (2002)
9. Spread the spacer rings (1) (3) using J 8059 for equivalent) to remove the spider assembly (2).
10. Remove the following items:
^
The spacer ring (1)
^
The spider assembly (2)
^
The second spacer ring (3)
^
The tripot boot (4)
11. Discard the tripot boot and spacer rings.
12. Clean the halfshaft bar. Use a wire brush to remove any rust in the boot mounting area (grooves).
13. Inspect the following items:
^
The needle rollers
^
The needle bearings
^
The trunnion
14. Check the tripot housing for unusual wear, cracks, or other damage.
15. Use the appropriate kit to replace any damaged parts.
Assembly Procedure
