TrailBlazer 4WD L6-4.2L VIN S (2002)
Constant Velocity Joint: Service and Repair
Front Wheel Drive Shaft Outer Joint and Seal Replacement
Wheel Drive Shaft Outer Joint and Seal Replacement
^
Tools Required
-
J 35910 Seal Clamp Tool
-
J 41048 Swage Clamp Tool
-
J 8059 Snap Ring Pliers
Disassembly Procedure
1. Place the halfshaft in a vise.
2. Place protective covers over the vise jaws.
3. Use a hand grinder to cut through the swage rings (2). Do not damage the outer race.
4. Compress the seal on the halfshaft and away from the CV joint outer race (1).
5. Wipe all grease away from the face of the CV joint.
