TrailBlazer 4WD L6-4.2L VIN S (2002)
K.
Transfer data file to the scan tool.
L.
Position the left side second row seat in order to access the rear fuse block.
M.
Remove the No. 6 (Liftgate Module/Driver Seat Module) fuse.
N.
Reconnect the scan tool to the vehicle.
0.
Turn ON the ignition, with the engine OFF.
P.
Select the Service Programming feature on the scan tool.
Q.
Press the Program button on the scan tool.
R.
Install fuse and reposition the seat.
2.
Perform system check by shifting transfer case to all modes of operation.
3.
Install the GM Recall Identification Label.
