TrailBlazer 4WD L6-4.2L VIN S (2002)
1. Install the new seal on the transfer case adapter.
2. Install the transfer adapter to the transmission.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the transfer case adapter mounting bolts to the transmission.
^
Tighten the bolts to 47 Nm (35 ft. lbs.).
4. Lower the transmission to install the transmission mount bolts.
5. Install the transmission mount bolts.
^
Tighten the bolts to 25 Nm (18 ft. lbs.).
6. Remove the transmission jack.
7. Install the transfer case assembly to the vehicle.
8. Lower the vehicle. Refer to Vehicle Lifting.