chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Drivetrain - Shudder/Binding/Feels Like Stuck in 4WD|Page 8500 > < Drivetrain - Shudder/Binding/Feels Like Stuck in 4WD|Page 8498
Page 4
background image

Tighten the bolts to 16 N.m (12 lb ft).

15.

Apply pipe sealant, P/N 12346004 (Canadian P/N 10953480), or equivalent, to the drain plug threads. Install the transfer case drain plug.

Tighten

Tighten the plug to 27 N.m (20 lb ft).

16.

Refill the transfer case with 1.8 L (2 qts) of Auto Trac II Transfer case lubricant, P/N 12378508 (Canadian P/N 10953626).

17.

Apply pipe sealant, P/N 12346004 (Canadian P/N 10953480), or equivalent, to the fill plug threads. Install the fill plug.

Tighten

Tighten the plug to 27 N.m (20 lb ft).

18.

Lower the vehicle.

19.

Connect the Tech 2(R) and use SPS reprogramming to reprogram the transfer case control module (TCCM) with TIS software version 11, released
October 2002 or newer.

Parts Information

Parts are currently available from GMSPO.

Warranty Information

For vehicles repaired under warranty, use the table.

Disclaimer

Drivetrain - Shudder/Binding/Feels Like Stuck in 4WD|Page 8500 > < Drivetrain - Shudder/Binding/Feels Like Stuck in 4WD|Page 8498