TrailBlazer 4WD L6-4.2L VIN S (2002)
Quarter Window Glass: Service and Repair
TOOLS REQUIRED
^
J 39032 Stationary Glass Removal Tool
^
Urethane Adhesive Kit GM P/N 12346392 or Equivalent
^
Isopropyl Alcohol or Equivalent
^
Cartridge-type Caulking Gun
^
Commercial-type Utility Knife
^
Razor Blade Scraper
^
Suction Cups
^
Plastic Paddle
REMOVAL PROCEDURE
CAUTION: If a window is cracked but still intact, crisscross the window with masking tape in order to reduce the risk of damage or
personal injury.
IMPORTANT: Before cutting out a stationary window, apply a double layer of masking tape around the perimeter of the painted surfaces and the
interior trim.
1. Open the liftgate.
2. Remove the upper quarter trim.
NOTE: In order to avoid damaging the antenna lead connector, follow these guidelines:
^
Use a plastic tool and carefully pry the connector from the window.
^
Do NOT pull on the connector, which may be stuck to the urethane adhesive or the headliner.
3. Disconnect the antenna lead located on the rear quarter window, if equipped.
CAUTION: Refer to Glass and Sheet Metal Handling Caution in Service Precautions.
IMPORTANT: Keep the cutting edge of the tool against the window. Do this from inside the vehicle.
